Skip to content
Appointment timing depends on ZIP code, route capacity, and appliance type.
Whirlpool kitchen and laundry repair. Clear estimates before any work begins.
Call (844) 968-2053
Whirlpool service — Whirlpool Wine Storage

Whirlpool

Whirlpool Wine Storage CL Error Code

Book a Repair (844) 968-2053
Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Whirlpool

Code overview at a glance.

The facts for this Whirlpool error, a plain-language snapshot, and what to confirm against your model number.

Error code CL / LO Low Temperature
Appliance Wine Storage
Content status Verified
Quick answer

CL or LO on a Whirlpool beverage center says the internal temperature is too low. The manual lists three checks and a one minute power cycle.

Model note: Whirlpool reuses codes across series and model years, so CL / LO Low Temperature may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Whirlpool

What this code may mean.

A plain-language reading of the code — always confirm against your model’s documentation.

The internal temperature is too low.

CL or LO: what the display is saying

On a Whirlpool beverage center, CL or LO means the inside temperature is too low.

Check before resetting

  1. Look at the door. It should be shut all the way, and it should not have stood open for a long stretch.
  2. Think about the last restock. Warm or room-temperature bottles added in bulk can pull the temperature down.
  3. Think about the power. After an outage, allow the unit time to settle.

Power reset

Break power for one minute by switching off the breaker or pulling the plug. Restore it and keep an eye on the display for one minute. Then confirm the unit is working normally.

Similar-looking codes: HI or LO and E1, each with its own entry.

Wine storage repair in our service area

For a beverage center that keeps showing the code, use our refrigerator repair line at (844) 968-2053. We cover the Miami, New York, Houston, Los Angeles and San Diego metro areas. Mention CL or LO, the model number and the reset you tried.

Source: Whirlpool Product Help: CL or LO Error Code, Beverage Center

Whirlpool

Safety warning before you continue.

Stop immediately if you notice smoke, sparks, a burning smell, gas odor, or water near electrical parts.

Important

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Whirlpool

Seeing this code on your appliance?

Book an Whirlpool appliance service visit for a clear estimate and approval before any repair.

Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Ready to restore your Whirlpool appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Tell us what’s wrong — we’ll take it from there.

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Prefer to call? (844) 968-2053
  1. Share the symptom Tell us the Whirlpool model and what’s going wrong.
  2. Confirm a window We’ll schedule a visit that fits your day.
  3. Approve before work You get a clear estimate — nothing starts without your OK.
Phone (844) 968-2053
Email info@whirlpoolservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Appointment timing depends on ZIP code, route capacity, and appliance type.
(844) 968-2053 Book a Repair