Skip to content
Appointment timing depends on ZIP code, route capacity, and appliance type.
Whirlpool kitchen and laundry repair. Clear estimates before any work begins.
Call (844) 968-2053
Whirlpool service — Whirlpool Cooktop E_8 Code

Whirlpool

Whirlpool Cooktop E_8 Code Power Reset

Book a Repair (844) 968-2053
Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Whirlpool

Code overview at a glance.

The facts for this Whirlpool error, a plain-language snapshot, and what to confirm against your model number.

Error code E_8
Appliance Cooktop
Content status Verified
Quick answer

E_8 on a Whirlpool induction cooktop is answered with a breaker reset. Steps and service contact are listed.

Model note: Whirlpool reuses codes across series and model years, so E_8 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Whirlpool

What this code may mean.

A plain-language reading of the code — always confirm against your model’s documentation.

Code listed with a power-reset procedure and no stated cause.

Induction cooktop code E_8 has a reset procedure from Whirlpool and no named fault, so the procedure is the whole answer.

Meaning of E_8

Think of E_8 as a reset-first code with no named cause.

Applies to: induction cooktops.

Steps in order

  1. Switch the cooktop’s circuit breaker(s) off and leave them off for one (1) minute.
  2. Turn the breaker(s) back on.
  3. Leave the cooktop alone until it cools down.
  4. Look at the cooktop again after one (1) minute of use to see whether the code is gone.
  5. Verify that the cooktop runs.

Also check these codes

  • E_7 Whirlpool cooktop, a sibling code on induction models.
  • cooktop E_H, a code for a cooktop that is too hot.
  • a neighbouring induction code with the same sort of reset: E_5.

Need cooktop service?

Service for a Whirlpool cooktop covers the Miami, New York, Houston, Los Angeles and San Diego metro areas. Phone (844) 968-2053 and have E_8, your model number and your reset attempts ready. See cooktop repair.

Source: Product Help: E_8 – Induction Cooktop

Whirlpool

Safety warning before you continue.

Stop immediately if you notice smoke, sparks, a burning smell, gas odor, or water near electrical parts.

Important

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Whirlpool

Seeing this code on your appliance?

Book an Whirlpool appliance service visit for a clear estimate and approval before any repair.

Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Ready to restore your Whirlpool appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Tell us what’s wrong — we’ll take it from there.

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Prefer to call? (844) 968-2053
  1. Share the symptom Tell us the Whirlpool model and what’s going wrong.
  2. Confirm a window We’ll schedule a visit that fits your day.
  3. Approve before work You get a clear estimate — nothing starts without your OK.
Phone (844) 968-2053
Email info@whirlpoolservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Appointment timing depends on ZIP code, route capacity, and appliance type.
(844) 968-2053 Book a Repair