Skip to content
Appointment timing depends on ZIP code, route capacity, and appliance type.
Whirlpool kitchen and laundry repair. Clear estimates before any work begins.
Call (844) 968-2053
Whirlpool service — Whirlpool Compact Front Load Washer F24 Code

Whirlpool

Whirlpool Compact Front Load Washer F24 Code Load or Water

Book a Repair (844) 968-2053
Daniel Reeves Written by Daniel Reeves Appliance Repair Content Specialist Published October 20, 2026

Whirlpool

Code overview at a glance.

The facts for this Whirlpool error, a plain-language snapshot, and what to confirm against your model number.

Error code F24
Appliance Washer
Content status Verified
Quick answer

A compact front load washer shows F24 for an overfull cycle or for too much inlet water.

Model note: Whirlpool reuses codes across series and model years, so F24 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Whirlpool

What this code may mean.

A plain-language reading of the code — always confirm against your model’s documentation.

F24 shows too much laundry for the program, or too much inlet water.

Two possible reasons

An illuminated red symbol may accompany F24 on compact front load washers. Decide which case fits.

Case A: the load is too big

The program has a small maximum load. Choose and start Rinse & Spin to complete the interrupted cycle. From now on, stay within the maximum load size shown in the “Program/Cycle Guide” in the Owner’s Manual.

Case B: too much water came in

  • Close the water faucet.
  • Press and hold Power for 3 seconds or longer so the washer drains; End on the display marks the finish of the drain phase.
  • Open the faucet again.
  • Water entering immediately, with no program running? Close the faucet, turn the washer off and unplug it. The “Assistance or Service” section of the Owner’s Manual explains how to reach a service representative.

Other codes

  • F20: no water or insufficient water supply
  • F22: front door lock issue

Service in the Miami, New York, Houston, Los Angeles and San Diego areas

If water keeps entering the compact washer unprompted, call (844) 968-2053. Give the code and the model number.

Source: Whirlpool Product Help: F24 – Error Code – Compact Front Load Washer

Whirlpool

Safety warning before you continue.

Stop immediately if you notice smoke, sparks, a burning smell, gas odor, or water near electrical parts.

Important

Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.

Whirlpool

Seeing this code on your appliance?

Book an Whirlpool appliance service visit for a clear estimate and approval before any repair.

Experienced technicians, clear diagnostics, and workmanship coverage on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Ready to restore your Whirlpool appliance?

Book a repair online or call us — clear estimates, approval before any work, and a workmanship warranty on completed repairs.

Book a Repair (844) 968-2053

Whirlpool

Tell us what’s wrong — we’ll take it from there.

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Prefer to call? (844) 968-2053
  1. Share the symptom Tell us the Whirlpool model and what’s going wrong.
  2. Confirm a window We’ll schedule a visit that fits your day.
  3. Approve before work You get a clear estimate — nothing starts without your OK.
Phone (844) 968-2053
Email info@whirlpoolservicecenter.support
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Miami, New York, Houston, Los Angeles and San Diego metro areas.
Response time Appointment timing depends on ZIP code, route capacity, and appliance type.
(844) 968-2053 Book a Repair